Parmar Metals Private Limited

GI Horizontal Tee (Ladder Type) is a cable tray fitting designed to connect three cable tray sections at 90° angles in the horizontal plane, forming a "T" configuration. It allows for the branching of cable routes from a main cable run, ensuring organized and efficient cable distribution across multiple paths.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

GI Ladder Horizontal Cross – Cable Tray 

The GI Ladder Horizontal Cross is designed to connect four ladder-type cable trays at a single junction, enabling organized cable routing in multiple horizontal directions. It facilitates a clean and secure cross-connection for complex cable tray layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this fitting offers excellent corrosion resistance and mechanical strength for long-lasting performance in industrial, commercial, and infrastructure installations.

The Horizontal Cross is compatible with standard ladder tray sizes and supports efficient cable management where multiple cable pathways intersect. Available in various sizes to match tray widths and system requirements.

GI Ladder Horizontal Cross – Cable Tray 

The GI Ladder Horizontal Cross is designed to connect four ladder-type cable trays at a single junction, enabling organized cable routing in multiple horizontal directions. It facilitates a clean and secure cross-connection for complex cable tray layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this fitting offers excellent corrosion resistance and mechanical strength for long-lasting performance in industrial, commercial, and infrastructure installations.

The Horizontal Cross is compatible with standard ladder tray sizes and supports efficient cable management where multiple cable pathways intersect. Available in various sizes to match tray widths and system requirements.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

GI Ladder Horizontal Cross – Cable Tray 

The GI Ladder Horizontal Cross is designed to connect four ladder-type cable trays at a single junction, enabling organized cable routing in multiple horizontal directions. It facilitates a clean and secure cross-connection for complex cable tray layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this fitting offers excellent corrosion resistance and mechanical strength for long-lasting performance in industrial, commercial, and infrastructure installations.

The Horizontal Cross is compatible with standard ladder tray sizes and supports efficient cable management where multiple cable pathways intersect. Available in various sizes to match tray widths and system requirements.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

GI Ladder Horizontal Cross – Cable Tray 

The GI Ladder Horizontal Cross is designed to connect four ladder-type cable trays at a single junction, enabling organized cable routing in multiple horizontal directions. It facilitates a clean and secure cross-connection for complex cable tray layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this fitting offers excellent corrosion resistance and mechanical strength for long-lasting performance in industrial, commercial, and infrastructure installations.

The Horizontal Cross is compatible with standard ladder tray sizes and supports efficient cable management where multiple cable pathways intersect. Available in various sizes to match tray widths and system requirements.

GI Ladder Horizontal Cross – Cable Tray 

The GI Ladder Horizontal Cross is designed to connect four ladder-type cable trays at a single junction, enabling organized cable routing in multiple horizontal directions. It facilitates a clean and secure cross-connection for complex cable tray layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this fitting offers excellent corrosion resistance and mechanical strength for long-lasting performance in industrial, commercial, and infrastructure installations.

The Horizontal Cross is compatible with standard ladder tray sizes and supports efficient cable management where multiple cable pathways intersect. Available in various sizes to match tray widths and system requirements.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Pre GI Horizontal Cross (Ladder Type) is a four-way cable tray fitting that connects four ladder trays at 90-degree angles in the horizontal plane, forming a cross configuration. It enables cable routing in four directions, allowing organized distribution from a central junction point.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

Ladder Reducer – Cable Tray 

The Ladder Reducer is designed to connect ladder-type cable trays of varying widths, enabling a seamless transition while ensuring secure cable support and alignment. It is essential for adapting cable tray systems to different load and space requirements.

Manufactured using Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the reducer delivers excellent corrosion resistance and structural durability for reliable performance in industrial, commercial, and infrastructure environments.

Available in Left, Right, and Center configurations, the Ladder Reducer is compatible with standard tray sizes and supports both horizontal and vertical installations, tailored to your project’s layout and cable load demands.

PRE Ladder Reducer is a specially designed fitting used to connect two ladder-type cable trays of different widths. It allows a smooth and secure transition in tray size, helping to route cables efficiently where load requirements change. Reducers are essential in maintaining proper cable management and structural integrity across a cable tray system.

GI Ladder Reducer – Tray Width Transition Fitting

The GI Ladder Reducer is designed to connect ladder-type cable trays of different widths, ensuring smooth cable flow and structural continuity across size transitions. It is commonly used to maintain cable alignment and support when downsizing or upsizing cable tray widths within a system.

Manufactured from high-quality Pre-Galvanized or Hot-Dip Galvanized Steel, the reducer offers excellent corrosion resistance, durability, and mechanical strength, making it suitable for both indoor and outdoor applications.

Available in Left, Right, and Center reducer types, it is fully compatible with standard ladder tray dimensions and supports both horizontal and vertical installations in demanding industrial, commercial, and infrastructure environments.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

Ladder Horizontal Elbow – Cable Tray Bending Fitting

The GI Ladder Horizontal Elbow is engineered to provide a smooth 90° or 45° horizontal bend for ladder-type cable trays, enabling efficient cable routing around corners and obstacles.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this elbow fitting offers excellent corrosion resistance and robust mechanical strength, making it suitable for demanding industrial, commercial, and infrastructure applications.

Available in standard ladder tray widths and bend angles, the Horizontal Elbow ensures seamless cable transition while maintaining cable protection and system integrity.

Ladder Horizontal Elbow – Cable Tray Bending Fitting

The GI Ladder Horizontal Elbow is engineered to provide a smooth 90° or 45° horizontal bend for ladder-type cable trays, enabling efficient cable routing around corners and obstacles.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this elbow fitting offers excellent corrosion resistance and robust mechanical strength, making it suitable for demanding industrial, commercial, and infrastructure applications.

Available in standard ladder tray widths and bend angles, the Horizontal Elbow ensures seamless cable transition while maintaining cable protection and system integrity.

Ladder Horizontal Elbow – Cable Tray Bending Fitting

The GI Ladder Horizontal Elbow is engineered to provide a smooth 90° or 45° horizontal bend for ladder-type cable trays, enabling efficient cable routing around corners and obstacles.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this elbow fitting offers excellent corrosion resistance and robust mechanical strength, making it suitable for demanding industrial, commercial, and infrastructure applications.

Available in standard ladder tray widths and bend angles, the Horizontal Elbow ensures seamless cable transition while maintaining cable protection and system integrity.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

Ladder Horizontal Tee – Cable Tray Junction Fitting

The Ladder Horizontal Tee is designed to connect three ladder-type cable trays at a junction, enabling secure and organized cable branching in different horizontal directions. It provides a smooth transition for cable routing in complex electrical layouts.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the Horizontal Tee offers excellent corrosion resistance and mechanical strength, ensuring durability in industrial, commercial, and infrastructure projects.

Compatible with standard ladder tray widths, this fitting is available in multiple sizes to suit various cable tray systems and installation requirements, facilitating efficient cable management at cable tray intersections.

Ladder Reducer – Cable Tray 

The Ladder Reducer is designed to connect ladder-type cable trays of varying widths, enabling a seamless transition while ensuring secure cable support and alignment. It is essential for adapting cable tray systems to different load and space requirements.

Manufactured using Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the reducer delivers excellent corrosion resistance and structural durability for reliable performance in industrial, commercial, and infrastructure environments.

Available in Left, Right, and Center configurations, the Ladder Reducer is compatible with standard tray sizes and supports both horizontal and vertical installations, tailored to your project’s layout and cable load demands.

Ladder Reducer – Cable Tray 

The Ladder Reducer is designed to connect ladder-type cable trays of varying widths, enabling a seamless transition while ensuring secure cable support and alignment. It is essential for adapting cable tray systems to different load and space requirements.

Manufactured using Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the reducer delivers excellent corrosion resistance and structural durability for reliable performance in industrial, commercial, and infrastructure environments.

Available in Left, Right, and Center configurations, the Ladder Reducer is compatible with standard tray sizes and supports both horizontal and vertical installations, tailored to your project’s layout and cable load demands.

Vertical External Riser is a ladder-type cable tray fitting used to guide cables downward from one vertical level to another while maintaining proper support and bend radius. It allows for a 90° vertical downward bend, ideal for installations where cable trays drop from higher elevations such as ceilings or platforms.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Vertical Riser – External Type

The External Vertical Riser is engineered for ladder-type cable trays to facilitate a smooth 90° upward transition for cables along walls, columns, or vertical structures. It ensures secure, organized routing without cable strain or damage.

Available in Mild Steel (MS) or Aluminium, and finished with Hot-Dip Galvanized (HDG), Pre-Galvanized (GI), or Powder Coating, this riser delivers superior corrosion resistance and high structural strength. Aluminium variants offer a lightweight yet durable solution for specialized or weight-sensitive installations.

Widely used in industrial, commercial, and infrastructure projects, the External Riser supports reliable vertical cable elevation while maintaining system accessibility and safety. Sizes are selectable based on tray width and project layout.

Ladder Horizontal Elbow – Cable Tray Bending Fitting

The GI Ladder Horizontal Elbow is engineered to provide a smooth 90° or 45° horizontal bend for ladder-type cable trays, enabling efficient cable routing around corners and obstacles.

Manufactured from Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, this elbow fitting offers excellent corrosion resistance and robust mechanical strength, making it suitable for demanding industrial, commercial, and infrastructure applications.

Available in standard ladder tray widths and bend angles, the Horizontal Elbow ensures seamless cable transition while maintaining cable protection and system integrity.

Ladder Reducer – Cable Tray 

The Ladder Reducer is designed to connect ladder-type cable trays of varying widths, enabling a seamless transition while ensuring secure cable support and alignment. It is essential for adapting cable tray systems to different load and space requirements.

Manufactured using Pre-Galvanized (GI) or Hot-Dip Galvanized (HDG) Steel, the reducer delivers excellent corrosion resistance and structural durability for reliable performance in industrial, commercial, and infrastructure environments.

Available in Left, Right, and Center configurations, the Ladder Reducer is compatible with standard tray sizes and supports both horizontal and vertical installations, tailored to your project’s layout and cable load demands.